Gilded Autumn Suite, Banner Year Bundle and Festive Corners

Hi all!  I hope you are all having a great week and I pray that you are all safe and healthy during these times.  As promised here are the directions for the projects I demonstrated in my Facebook Live on Sunday, August 23rd.  Enjoy!

Grateful for You Card

 

Supplies:

 

Stamps: Beautiful Autumn

Inks: Versamark, Cajun Craze

Cardstock: Cajun Craze – two pieces; one cut 8/12” x 5 1/2 and scored at 4 ¼: and one cut to 2 ½’ x 2 ½” square.

Brushed Metallic – the lighter Gold of the three in the pack, two pieces:  one cut to 3 ½” x 3 ½” and one cut to 1 ¼” x 2 ½”. 

Gilded Autumn Designer Series paper – two pieces; one cut to 3” x 3” and one cut 1 ¾” x 4” (see photo for which design was used)

Early Espresso – one piece cut to 1” x 2 ½”

Very Vanilla – one piece cut to 4” x 5 ¼” for inside of card

Accessories: Gold embossing powder, Banner Triple Punch, Basket Weave & Metallic Ribbon combo pack, Acorn Trinkets, Linen thread, Heat embossing tool, Mini Stampin’ Dimensionals.

 

Directions:

 

Adhere the 3” x 3” piece of Designer Series Paper to the 3 ½” x 3 ½” piece of Brushed Metallic Gold cardstock.  Adhere the Cajun Craze 2 1/2 “x 2 ½” square to the center of the Designer Series Paper. Use the Triple Banner punch to create a banner end on the 1 ¾” x 4” piece of Designer Series Paper.  The piece will not fit into one of the channels of the punch so turn the punch over to be sure your paper is centered in the punch.  Use scotch tape to mask off the “My Heart” and “is” words on the stamp.  Ink the stamp with Versamark and then remove the scotch tape.  Stamp onto the 1” x 2 1/2'” piece of Early Espresso.  You will see that the only thing that inked is the “grateful for you” wording on the stamp.  Heat emboss using Gold embossing powder.  Cut a slanted edge on the embossed piece (use the photo for placement). Adhere the embossed piece to the 1 ¼” x 2 ½” piece of Gold Brushed Metallic cardstock and trim it to match.

Cut a 6” piece of the Mint Macaroon ribbon from the Basked Weave & Metallic Ribbon combo pack.  Wrap this around the banner punched piece of designer series paper.  Cut about 15” of the Metallic ribbon from the combo pack, wrap it around the banner piece and tie a bow on the right hand side.  Use Mini Dimensionals to mound the Grateful for you piece to the left side of the banner and adhere to the layered square.  Adhere the square to the front left side of the card.  Use Cajun Craze ink to stamp an acorn on the bottom left of the card.  Use the Cajun Craze ink to stamp a few random Acorn images on the Very Vanilla piece and then adhere that to the inside of the card.

 

 

 

Thank You Card

 

Stamps: Beautiful Autumn

Inks: Memento Tuxedo Black, Mint Macaron, Cajun Craze, Early Espresso, Crumb Cake

Cardstock: Early Espresso – one piece cut 8 ½” x 5 ½” and scored at 4 ¼”.

Very Vanilla –three pieces; one cut to 1” x 2 ¾” and one cut to 4” x 5 ¼” (for inside of card) and a large scrap to stamp and punch images.

Designer Series Paper – Two pieces; one piece cut to 4” x 5 ¼” (see photo for which design was used) and one piece cut to ½” x 4” (for inside of card)

Accessories: Autumn Punch Pack

 

Cut 1” from the left side of the Designer Series Paper and “flip” it over so the back side of the Designer Series paper is showing.  Adhere both pieces to the card base.  Stamp the sentiment toward the right edge of the 1” x 2 ¾” piece of Very Vanilla cardstock and adhere it to the lower right side of the card front (use photo for placement).  One the large scrap of Very Vanilla cardstock stamp the five each of the outline images for the Acorn, Maple Leaf and Oak Leaf.  Use Mint Macaron to stamp the “filler” stamp on each of the Oak Leaf images, Cajun Craze to stamp the “filler” image of the Maple Leaf, Early Espresso to stamp the “filler” image for the acorn cap and Crumb Cake to stamp the “filler” for the acorn itself.  Punch out the images and place along the seam of the two pieces of Designer Series Paper (See photo for placement).  Adhere the ½” x 4” piece of Designer Series Paper to the 4” x 5 ¼” piece of Very Vanilla and adhere to the inside of the card.

 

 

Happy Fall Y’all Card

Stamps: Banner Year

Inks: Memento Tuxedo Black

Cardstock: Early Espresso – three pieces; one cut 8 ½” x 5 ½” and scored at 4 ¼” , one cut to ¾” x 4” and one piece cut ½” x 5 ¼”

Gilded Autumn Designer Series Paper (see photo for pattern) – three pieces; one cut to 4” x 5 ¼”, one cut to ½” x 2 ¾” and one cut to ¾” x 4” (for inside of card)

Very Vanilla – one piece cut to 4” x 5 ¼” (for inside of card)

Accessories: Banners Pick a Punch

 

Cut 1” from the left side of the 4” x 5 ¼” piece of Designer Series Paper and “flip” the back side to the front and adhere these pieces to the card front.  Use the ½” x 5 ¼” piece of Early Espresso to cover the seam.  Use Memento ink to stamp the Jack O’Lantern face onto the all of the larger pumpkin images on the Designer Series Paper.  Use the Crumb Cake side of the ½” x 2 ¾” piece of Designer Series Paper and punch on the right hand side using the Banners Pick a Punch.  Stamp the sentiment onto the punched piece of Designers Series Paper.  Use the Banners Pick a Punch to punch the right side of the ¾” x 4” piece of Early Espresso cardstock.  Adhere the stamped Crumb Cake piece of Designer Series Paper to the punched Early Espresso piece leaving an even border at the top, bottom and right sides.  Trim the left sides even.  Adhere this piece to the lower right side of the card front (use the photo for placement)

 

“Spooky” Card

 

Stamps: Festive Corners

Inks: Memento Tuxedo Black, Pumpkin Pie, Smoky Slate, Basic Gray

Cardstock: Basic Black – Three pieces; one cut to 4 ¼” x 5 ½”, one cut to 2 ½” x 11” and scored at 5 ½” and one cut to 1 1/8” x 3”

Whisper White – three pieces; one cut to 3” x 5 ¼”, one cut to 2 ¼” x 5 ¼” and one cut to 1” x 2 7/8”

Plaid Tidings Designer Series Paper (Refer to photo for pattern used) – four pieces; one cut to 2 ¼” x 5 ¼”, one cut to ¾” x 2 ¼” and two pieces cut 1” x 5 ¼”

Accessories: Rhinestones, Dark Basic Black Blends, Black Stampin’ Dimensionals and Stampin’ Sponges.

 

Directions:

Adhere the two 1” pieces of Designer Series Paper to opposite sides of the 4 ¼” x 5 ½” card base.  Set aside.  Use Memento Ink to stamp the Cobweb corner image in the right top corner of the 3” x 5 ¼” piece of Whisper White Cardstock.  Adhere the 1 1/8” x 3” piece of Basic Black cardstock onto the cobweb image, lining up the right side of the cardstock with the line of the cobweb image.  Turn the cobweb stamp upside down and stamp with Memento ink lining it up with the bottom left side of the Basic Black cardstock.  “Fussy cut” around the cobweb image.  Sponge the cobweb image with Smoky Slate ink and then sponge around the edges of the cobweb image with Basic Gray ink.  Stamp the “Spooky” sentiment onto the ¾” x 2 7/8” piece of Whisper White.  Sponge around the edges of this piece using Pumpkin Pie ink.  Adhere this piece to the Basic Black piece on the cobweb image.  Adhere the 2 ¼” x 5 ¼” piece of Designer Series Paper to the front of the folded 2 ½” x 11” piece of Basic Black.  Use Black Stampin’ Dimensionals to adhere the cobweb image to this piece.  Use the Dark Basic Black Blends to color six of the rhinestones.  Place one rhinestone on the inside corner of each cobweb and then place two rhinestones at the top left and two at the bottom right (use photo for placement).  Use Memento Ink to stamp the “Trick or Treat, Happy Halloween” image in the top right hand corner of the 2 ¼” x 5 ¼” piece of Whisper White.  Use the Memento ink to stamp the spider image directly below the “e” in Treat. 

Adhere the ¾” x 2 ¼” piece of Designer Series Paper to this and adhere this piece to the inside of the folded 2 ½” x 11” piece of Basic Black.  Adhere the folded piece in the center of the card base.

Have a great week!   See you Sunday, August 30th at 2pm for another Facebook Live!