Tuesday, November 17, 2020

Christmas Gleaming Variety Bundle

 Things are back to normal after all the excitement of participating in OnStage Live last weekend.  I am continuing projects which can be used for Christmas cards.  This week I am using the Christmas Gleaming Variety Bundle found on page 19 of the August-December 2020 Mini Catalog.  This bundle contains a stamp set, a punch pack and a pack of designer series paper!  It's a wonderful bundle!!! Here are the projects I demonstrated on my Facebook Live this past Sunday (11/15/20)

Deck the Halls Card

 


 Supplies:
Stamps: Christmas Gleaming
Inks: Memento Tuxedo Black, Night of Navy
Stampin’ Blends: Light and Dark Mossy Meadow, Light and Dark Cherry Cobbler
Cardstock:  Night of Navy – one piece cut to 8 ½” x 5 ½” and scored at 4 ¼”
Very Vanilla – five pieces; two pieces cut to 4” x 5 ¼”, one scrap large enough to accommodate the holly image in the stamp set, one scrap large enough to accommodate the smaller ornament image and one scrap large enough to accommodate a 2” circle punch
Copper Foil Sheets – One scrap large enough to accommodate a 2 ¼” circle punch
Designer Series Paper (DSP):  Brightly Gleaming (see photo for patterns used) – Pattern One - two pieces; one piece cut to 3” x 4”, one piece cut to ½” x 5 ¼”, Pattern Two – one piece cut to 2 ½” x 5 ¼”
Accessories:  Adhesive of choice, Stampin’ Dimensionals, Cinnamon Cider Stampin’ Write Marker, 2” Circle punch, 2 ¼” Circle punch, Gleaming Ornaments punch pack, Curvy Dies
 
Directions:

 Use the Curvy die dotted border die to cut the 3” x 4” Pattern One piece of DSP in half.  Adhere the 2 ½” x 5 ¼” Pattern Two piece of DSP to the center of one of the Very Vanilla 4” x 5 ¼” pieces of cardstock.  Adhere the two cut Pattern One pieces to this piece, you should have about a 1” gap between the pieces which allows the Pattern Two piece to show through. Use Memento ink to stamp the holly image of the stamp set onto one of the scraps of Very Vanilla.  Use the Light and Dark Mellow Moss and Light and Dark Cherry Cobbler Stampin’ Blends to color the image.  “Fussy cut” the image.  Use Night of Navy ink to stamp the “Deck the Halls” sentiment onto the scrap which is large enough to accommodate the 2” punch.  Punch the sentiment out with the 2” punch aligning the sentiment slightly to the right (so the Holly will fit onto the same circle).  Punch a circle from the Copper Foil Sheet scrap with the 2 ¼” punch.  Use Stampin’ Dimensionals to adhere the 2” circle piece to the 2 ¼” circle piece.  Adhere the cut out holly image to the left side of the 2” circle piece (see photo for placement) and then adhere the whole piece to the right front of the panel with the patterned DSP.  Adhere this whole piece to the card front.  Use Night of Navy ink to stamp the “& be Jolly” sentiment in the top left corner of the remaining 4” x 5 ¼” piece of Very Vanilla cardstock.  Adhere the ½” x 5 ¼” piece of Pattern One DSP to the bottom of the Very Vanilla piece.  Use Night of Navy ink to stamp the small ornament image onto the remaining scrap of Very Vanilla.  Use the coordinating punch from the Gleaming Ornaments punch pack to punch out the ornament. Color the ornament “hanger” with the Cinnamon Cider Stampin’ Write marker and then adhere it to the bottom right of the Very Vanilla piece, centering it on the right hand side of the DSP piece.  Adhere this piece to the inside of the card.  Enjoy!

 

Ornament Card

 


Stamps: Christmas Gleaming
Inks:  Night of Navy
Cardstock:  Night of Navy – One piece cut to 4 ¼ x 5 ½ and scored at 4 ¼”
Very Vanilla – four pieces; one piece cut to 1 ½” x 6”, one piece cut to 3” x 6”, one piece 1” x 2 ½” and one piece cut to 4” x 5 ¼”
Copper Foil Sheets – two pieces; one piece cut to 1” x 6” and one piece cut to ¾” x 6”
Designer Series Paper:  Brightly Gleaming (see photo for patterns used) – four pieces: Pattern One - one piece of cut to 4" x”5 ¼” (be mindful that the stripes of this DSP are running horizontally) and one piece cut to ¾” x 4”, Pattern Two – one piece cut to 4” x 5 ¼”, Pattern Three – one piece cut to 1 ½” x 4”
Accessories:  Adhesive of choice, Gleaming Ornaments punch pack.
 
Directions:
 

Adhere the ¾” x 4” piece of Pattern One DSP to the 4” x 5 ¼” piece of Very Vanilla cardstock and then adhere this piece to the inside of the card.  Cut the 4” x 5 ¼” piece of Pattern One DSP in half (you will now have two pieces, each 2” x 5 ¼”).  Flip one of the DSP pieces over so the striped image is showing.  Adhere both pieces to the card front with the striped piece being on the right hand side (see photo).  Adhere the 1” x 6” piece of the Copper Foil sheet to the top of the 3” x 6” piece of Very Vanilla cardstock. Use the large ornament punch from the Gleaming Ornaments punch pack to punch three ornaments (the copper will be at the top of the punched pieces) and then also punch three of these ornaments from the Pattern Two DSP.  Adhere the ¾” x 6” piece of the Copper Foil sheet to the top of the 1 ½” x 6” piece of Very Vanilla.  Use the small ornament punch from the Gleaming Ornaments punch pack to punch three ornaments (the copper will be at the top of the punched pieces) and then also punch three of these ornaments from the Pattern Three DSP.  Cut the ornament tops from the six punched DSP pieces, rounding as you cut to mimic the curve of the top of an ornament).  Adhere these to the corresponding punched pieces of the Very Vanilla with the copper at the top.  Adhere the completed ornaments to the card front using the photo for placement.  Use Night of Navy ink to stamp the “Merry Christmas” sentiment onto the remaining 1” x 2 ½” piece of Very Vanilla.  “Fussy cut” the image and then adhere it to the card front.  Enjoy!

 These are just two of the many ideas for this set.  It is so versatile! – you can even use the punches to create 3D ornaments!   You can see a video of the creation of these cards on the Facebook Live recording from November 15th on my Facebook Page HERE

If you would like to purchase these products just click "Add All to Cart" and you'll be taken directly to my Online store.  Be sure to use the November Host Code 9GCRE3GH if your order is under $150 (if it's over $150 be sure to take advantage of the Host Benefits offered by Stampin' Up!

Monday, November 9, 2020

Christmas Means More from Facebook Live 11-8-2020

I had a great weekend attending Stampin' Up!'s Onstage Live.  We normally gather in Salt Lake City for this event but due to the pandemic, we had the event virtually.  Stampin' Up! did an awesome job converting this event to a virtual event.  My roomies, Sue and Michelle and my downline Karen were able to chat during the presentations and met each day for a Zoom lunch.  We saw some awesome new products and got great ideas for presenting them to you!  I can't wait to show you some of the projects but will save them for when the products are available to you (well maybe I'll do a sneak peak closer to Christmas!)  


Christmas Means More Card
 


Supplies:
 
Stamps: Christmas Means More
Inks: Shaded Spruce
Stampin’ Blends: Light Just Jade, Dark Cherry Cobbler
Cardstock:  Shaded Spruce – one piece cut to 8 ½” x 5 ½” and scored at 4 ¼”
Whisper White – Two pieces; one piece cut to 2 ¾” x 3 ¾” and one piece cut to 4” x 5 ¼”
Cherry Cobbler – one piece cut to 5” x 3 ¾”
Designer Series Paper (DSP):  ‘Tis the Season – two pieces; one piece cut to 4 3/8” x 3 ¾” and one piece cut ¾” x 4”
Accessories:  Adhesive of choice, Stampin’ Dimensionals, Wonder of the Season Ribbon Combo Pack, Rhinestones, Stampin’ Trimmer, Mini Glue Dots
 
Directions:

This card uses a fun way of cutting DSP for a background that we learned from Sara Douglas, Stampin' Up!'s CEO.  Adhere the ¾” x 4” piece of DSP to the 4” x 5 ¼” piece of Whisper White cardstock.  Use Shaded Spruce ink to stamp the holly and berry image in the upper left corner of this piece.  Use the Dark Cherry Cobble and Light Just Jade Blends to color the image.  Attach this piece to the inside of the card base.  Place the 4 3/8” x 3 ¾” piece into the trimmer with the longer edge at the top of the trimmer.  Cut the DSP in half at an angle.  Cut each of the halves into three pieces using an angle cut each time.  BE SURE TO KEEP THE PIECES IN ORDER. Place the cut pieces in order on your work surface with the 3 ¾” length now along the top.  Adhere the pieces to the 5: x 3 ¾: piece of Cherry Cobbler cardstock starting with the top piece, then the bottom piece and then space the other pieces evenly between those two.  Adhere the finished piece to the front of the card.  Use Shaded Spruce ink to stamp the “Christmas Means More” sentiment onto the 2 ¾” x 3 ¾” piece of Whisper White cardstock, being sure to stamp the image at the top of the piece so as to leave room for the ribbon.  Use the Light Just Jade Blends to color the holly images in the sentiment.  Cut a 5” piece of the Shaded Spruce ribbon from the Wonder of the Season Ribbon Combo Pack and secure it around the bottom of the stamped piece.  Cut a 5” piece of the gold cording from the Wonder of the Season Ribbon Combo Pack and tie it around the center of the Shaded Spruce ribbon, gathering the ribbon as you tie a knot with the cord.  Cut the ends of the cord as close to the knot as possible.  Tie a bow with the Shaded Spruce ribbon and secure it over the gathered ribbon with mini glue dots.  Use Stampin’ Dimensionals to adhere this piece to the front of the card.  Use the Dark Cherry Cobble Blend to color six of the smallest rhinestones.  Adhere these to the card front as the berries in the holly images.  Enjoy!

 

Angel Gets Its Wings Card


Stamps: Christmas Means More

Inks:  Basic Gray
Stampin’ Blends:  Light Just Jade and Light Cherry Cobbler
Cardstock:  Smoky Slate – two pieces; on piece cut to 4 ¼ x 5 ½ and one piece cut to 2 ¾” x 8 ½” and scored at 4 ¼” and a scrap at least 1” x 1”
Cherry Cobbler – three pieces – one piece cut to 4 1/8” x 2 5/8” and two pieces cut to 1 ¼” x 4 1/8”
Whisper White – two pieces cut to 2 ½” x 4”
Designer Series Paper:  ‘Tis the Season – four pieces; two pieces cut to 1 1/8 x 4” and two pieces cut to ¾” x 2 ½”
Accessories:  Adhesive of choice, Whisper White Crinkled Seam Binding Ribbon, Mini Glue Dots, Stampin’ Dimensionals, Wink of Stella
 
Directions:

Adhere the two pieces of 1 ¼” x 4 1/8” Cherry Cobbler cardstock to the right and left edges of the 4 ¼” x 5 ½” piece of Smoky Slate cardstock leaving about a 1/16” border around the edges.  Adhere the two 1 1/8” x 4” pieces of DSP to the Cherry Cobbler panels again leaving a 1/16” border.  Adhere the scored 2 ¾” x 8 ½” piece of Smoky Slate cardstock to the card base with the fold along the top edge.  Adhere one of the ¾” x 2 ½” pieces of DSP to one of the 2 ½” x 4” pieces of Whisper White cardstock and adhere to the inside of the folded Smoky Slate piece.  Adhere the 4 1/8” x 2 5/8” piece of Cherry Cobbler to the front of the folded Smoky Slate Piece leaving a 1/16’ inch border.  Use Basic Gray ink to stamp the sentiment onto the remaining piece of 2 ½” x 4” piece of Whisper White cardstock, positioning it toward the top of the piece. Color the bells in the image using the Just Jade and Light Cherry Cobbler Blends.  Adhere the remaining ¾” x 2 ½” piece of DSP to the stamped piece about ¼” to ½” from the bottom of the piece.  Use Basic Gray ink to stamp the small bell image onto the small scrap of Smoky Slate cardstock.  Use scissors to “fussy cut” the image. Use a Stampin’ Dimensional to adhere the bell to the right side of the strip of DSP.  Tie a small bow with the ribbon and adhere it to the top of the small bell with a mini glue dot.  Use Wink of Stella to accent all the bell images. I wish you could really see the sparkle the Wink of Stella adds!  Enjoy!

 

II adore this set and it really makes quick and easy cards.  You can see a video of the creation of these cards on the Facebook Live recording from November 8th on my Facebook Page HERE

 

See you next Sunday (November 15th) at 2pm on my Facebook Live!

Monday, November 2, 2020

Curvy Celebrations

For the past few years, right before the release of a new mini-catalog or the major catalog, Stampin’ Up! gives customers a chance purchase Early-Release products.  This year, they’ve added something new!  In addition to the Early-Release products you have the chance to buy exclusive products that match the bundle!  These additional products are available for a limited time (November 3rd – January 4th).   The name of the Early-Release Bundle is the Quite Curvy Bundle and the exclusive products are the Curvy Christmas Stamp Set and Classic Christmas 6” x 6” Designer Series Paper.  You can see everything that’s included in my Online Store tomorrow, November 3rd.  Just click on my Shop Now button.  Here are the cards I demonstrated during my Facebook Live on November 1st.

 

 

Happiest of Birthdays Card


Supplies:

 Stamps: Quite Curvy
Inks: Early Espresso and Tuxedo Black Memento Ink
Stampin’ Blends: Light Just Jade, Light Cherry Cobbler and Light and Dark Seaside Spray
Cardstock:  Sahara Sand – one piece cut to 8 ½” x 5 ½” and scored at 4 ¼”
Whisper White – two pieces cut to 4” x 5 ¼” and scraps large enough to accommodate the die cuts
Designer Series Paper (DSP):  Classic Christmas – two pieces; one 4” x 4” and one ½” x 4”
Accessories:  Adhesive of choice, Stampin’ Dimensionals, Curvy Dies
 
Directions:
 

Use the curved die with the “dot” cutouts from the Curvy Dies to cut the 4” x 4” piece of DSP (about 1/3 of the way from the top of the DSP).  Use Memento Ink to stamp the ivy image, the floral garden image and two birds onto a scrap of Whisper White cardstock (you may have to use several scraps) then use the matching Curvy Dies to cut them out.  Color the ivy image with the Light Just Jade Blend, the garland with Light Just Jade and Light Cherry Cobble Blends and the birds with Light and Dark Seaside Spray Blends.  Adhere the piece of DSP with the plain edge to the bottom of one of the 4’ x 5 ¼” pieces of Whisper White cardstock.  Use Stampin’ Dimensionals to adhere the ivy image along the curve of this piece and trim the image even with the sides of the card.  Adhere the remaining piece of DSP to the top portion of the Whisper White piece (you should have about a 1” gap of Whisper White showing between the two DSP pieces).  Use Stampin Dimensionals to adhere the garland image and the two birds to the top portion of the card (see photo for placement).  Attach the sentiment stamp to an acrylic block making sure it follows the curves of the cut DSP (photopolymer stamps are flexible so you can bend them as needed).  Use Early Espresso ink to stamp the sentiment, centering it between the two DSP pieces.  Adhere this whole piece to the front of the card base.  Adhere the ½” x 4” piece of DSP to the remaining 4” x 5 ¼” piece of Whisper White and then adhere to the inside of the card base.

  

Merry and Bright Card

 


Supplies:

Stamps: Curvy Christmas
Inks:  Shaded Spruce, Cherry Cobbler
Cardstock:  Cherry Cobbler – one piece 8 ½” x 5 ½” scored at 4 ¼”
Whisper White – three pieces; two cut to 4: x 5 ¼” and one cut to 4 1/8” x 5 3/8”
Designer Series Paper:  Classic Christmas – three pieces; one cut to 3: x 6”, one cut to 2” x 6” and one cut to ½’ x 6”
Accessories:  Adhesive of choice, Curvy Dies
 
Directions:
 

Use the curved die with the “dot” cutouts from the Curvy Dies to cut the 2” x 6” and the 3” x 6” pieces of DSP in half.  Adhere two of the pieces to the bottom of one of the 4” x 5 ¼” pieces of Whisper White aligning the left edges (see photo for placement).  The DSP will be longer than the cardstock, just trim that off.  Use Shaded Spruce ink to stamp the tree image directly above the DSP and then use Cherry Cobbler ink to stamp the sentiment above the trees (again being sure the curve of the stamp matches the curve of the DSP). Adhere the remaining two pieces of DSP to the top of the card and trim off any DSP.  Again, trim the DSP to match the cardstock as needed.  Mount this piece to the 4 1/8” x 5 3/8” piece of Whisper White cardstock and then adhere to the Cherry Cobbler card base.  Adhere the ½” x 6” piece of DSP to the long side of the remaining 4” x 5 ¼” piece of cardstock and then adhere to the inside of the card base.

 

I hope you love working with these brand new products as I have.  You can see a video of the creation of these cards on the Facebook Live recording from November 1st on my Facebook Page HERE

 

See you next Sunday (November 8th) at 2pm on my Facebook Live! 

Tuesday, October 27, 2020

Life is Beautiful and Whale Done

 

Every week Stampin’ Up! has a newsletter for demonstrators which gives samples for us to use to inspire our customers.  This past week’s samples were based on using limited supplies.  Each card uses the same supplies and measurements.  The supplies are as follows:

 

Cardstock:  Two pieces (a color that coordinates with the Designer Series Paper use); one cut to 8 1/2 “ x 5 ½” and scored at 4 ¼” and one cut to ¾” x 4”
Whisper White - one piece cut to 3 ¾” x 4”
Designer Series Paper: one piece cut to 2” x 5 ½”
 
Listed below each photo are the supplies I used along with any inks, accessories, etc.
 
 
Hello Card
 
Supplies:
 
Stamps: Life is Beautiful
Inks: Soft Suede, Pear Pizzazz, Blushing Bride
Color of Cardstock used:  Soft Seafoam
Designer Series Paper used:  In Good Taste
Accessories:  Adhesive of choice
 
Directions:

 Use Soft Suede ink to stamp the large tree onto the left side of the 3 ¾” x 4” piece of cardstock. Use Pear Pizzazz ink to stamp the leaf images onto the tree and the ground at the bottom of the tree.  Use the Blushing Bride ink to stamp the “bokeh” dots image over the leaves imitating blossoms on the tree.  Use Soft Suede ink to stamp the sentiment onto the ¾” x 4” piece of Soft Seafoam cardstock.  Adhere the 2” x 5 ½” piece of Designer Series Paper about ¼” from the left side of the card front.  Adhere the 3 ¾” x 4” stamped piece over that leaving about ¼” from the right hand side of the card.  Adhere the ¾” x 4” piece across the image about ¾” from the bottom of the image.  (If desired you can use an additional piece of 4” x 5 ¼” Whisper White on the inside of the card).

  

Birthday “Fishes” Card

 


Stamps: Whale Done
Inks:  Night of Navy
Color of Cardstock used:  Balmy Blue
Designer Series Paper used:  Whale of a Time
Accessories:  Adhesive of choice, Seabed 3D Embossing Folder, Whale Builder Punch, Stampin’ Dimensionals
 
Directions:

Use the Whale Builder Punch to punch a Whale from the Designer Series Paper.  Use the back side of the paper to punch the “spout” water.  Use the Seabed 3D Embossing Folder to emboss the 3 ¾” x 4” piece of Whisper White.  Use Night of Navy ink to stamp the “birthday fishes” sentiment on the right side of the ¾” x 4” piece of Balmy Blue cardstock.  Use Night of Navy ink to repeatedly stamp the school of fishes image onto the left side of the ¾” x 4” piece of Balmy Blue cardstock ending right before the sentiment.  Adhere the 2” x 5 ½” piece of Designer Series Paper about ¼” from the left side of the card front.  Adhere the embossed piece of Whisper White onto the card front leaving about ¼” from the right side.  Adhere the ¾” x 4” piece of Balmy Blue to the card front about ¾” from the bottom of the embossed piece.  Adhere the whale to the embossed piece using Stampin’ Dimensionals and then adhere the “spout” water above the Whale.  (If desired you can use an additional piece of 4” x 5 ¼” Whisper White on the inside of the card).

 I hope you enjoyed seeing how limited supplies can be used for different looks in card making.  You can see a video of the creation of these cards on the Facebook Live recording from October 25th HERE

 

See you next Sunday (November 1st) at 2pm on my Facebook Live!

Sunday, October 18, 2020

Winter Woods and Beautiful Autum

 Okay, y'all don't faint.  I actually have the directions for today's Facebook Live up on the SAME DAY!!!  LOL!!!  I had fun making today's cards and I hope you enjoy them as well.  Remember, if you want to order any of these products, just click the "Shop Now" button.  Be sure to use October's Host Code: WNTVRB7Q if your order is under $150 (if it's over $150 be sure to take advantage of the Host Rewards Stampin' Up! offers).  Also, I am only $400 away from by $200,000 career sales!!!!!!  Thank you to everyone who has ordered!  I'm hoping to hit the goal by the end of October.

Winter Woods Card


 

Supplies:
 
Stamps: Winter Woods
Inks: Mossy Meadow, Early Espresso
Cardstock:  Mossy Meadow – three pieces; one piece cut to 8 ½” x 5 ½” and scored at 4 ¼”, One piece cut to 3 1/3” x 1 ¼” and one piece cut to 4” x 5 ¼”
Early Espresso – two pieces; one piece cut to 4 1/8” x 5 3/8” and one piece cut to 3 5/8” x 1 ½”
Very Vanilla – two pieces bot cut to 4: x 5 ¼”
Accessories:  Banner Punch, In The Woods dies, Evergreen Forest 3D Embossing Folder, Mossy Meadow Diagonal Stripe Ribbon, Brayer, Stampin’ Dimensionals, Mini Glue Dots
 

Directions:

 

Use Evergreen Forest 3D Embossing Folder to emboss one of the 4” x 5 ¼” Very Vanilla cardstock pieces.  Ink the brayer with Mossy Meadow ink and apply to the embossed piece.  Continue inking until you reach the desired shade. Adhere this piece to the 4 1/8” x 5 3/8” piece of Early Espresso cardstock.  Cut a 10” piece of Mossy Meadow Diagonal Strip Ribbon.  Tie a knot using the ends.  This creates a loop of the ribbon.  Cut the loop and wrap the knotted ribbon around the embossed piece and secure the ends on the back using regular tape. Use a Mini Glue Dot to hold the knot in place if desired.  (se photo for placement of knot).  Adhere this piece to the card front.  Use the Banner Punch to punch the ends of the 3 ½” x 1 ¼” Mossy Meadow cardstock and the 3 5/8” x 1 ½” piece of Early Espresso cardstock.   Stamp the sentiment onto the punched Mossy Meadow cardstock piece, positioning toward the right side of the banner.  Adhere the Early Espresso banner to the card front, slipping it under the ribbon.  Use Stampin’ Dimensionals to adhere the Mossy Meadow banner over the Early Espresso banner (see photo). Use Mossy Meadow ink to stamp the fir tree image from the Winter Woods set onto the 4” x 5 ¼” piece of Mossy Meadow cardstock. Die cut using the coordinating die from the In The Woods dies. Ahdere the die cut fir tree to the card front.  For the inside of the card, cut a 4 ½” piece of the Mossy Meadow Diagonal Stripe Ribbon and place along the bottom edge of the remaining 4” x 5 ¼” piece of Very Vanilla cardstock.  Trim the ribbon flush with the sides of the cardstock and then adhere to the inside of the card base.

 

 

Have a Beautiful Day Card

(Thank you to Sue Erickson for teaching me this technique)

 


Stamps: Beautiful Autumn
Inks:  Early Espresso
Stampin’ Blends:  Dark Crumb Cake (optional)
Cardstock: Cajun Craze – one piece cut to 8 ½” x 5 ½” and scored at 4 ¼”
Crumb Cake – one piece cut to 4” x 5 ¼”
Very Vanilla – one piece cut to 4” x 5 ¼”
Gold Foil – one scrap for cutting a circle
 
Designer Series Paper (DSP): Gilded Autumn – three pieces; one cut to 4” x 5 ¼”, one cut to ¾” x 4” and one cut to ¼” x 4” plus scraps for cutting four circles (refer to photo for patterns used)
Accessories: Layering Circles dies and Foam Adhesive strips
 

Directions:

 
Adhere the ¾” x 4” piece of DSP to the bottom of the 4” x 5 ¼” piece of Crumb Cake cardstock and adhere this piece to the inside of the card base.  Adhere the 4” x 5 ¼” piece of DSP to the card front. Use the following diameters of circles from the Layering Circle Dies to cut the DSP and the Gold Foil cardstock: 2 3/8”, 2 1/8”, 1 7/8”, 1 5/8” (this is the one used to cut the Gold Foil Cardstock) and 1 3/8”.  (see photo for patterns used).  After all circles are cut, cut each circle in half.  Use adhesive to adhere the  half-circle pieces together using the photo as a guide.  Use Early Espresso to stamp the sentiment onto the ¼” x 4” piece of DSP.  Adhere the half-circle pieces to the cardfront aligning them as show in the photo and leaving room for the sentiment.  Cut a 3 ¾: piece of Foam Adhesive strip. (I did not care for the foam being so stark white so I colored the non-adhesive sides of the strips with the Dark Crumb Cake Blend marker.  This is totally optional though).  Apply the Foam Adhesive strip to the back of the ¼” x 4” piece of DSP containing the sentiment and place on the card front between the two half-circle pieces.

Saturday, October 17, 2020

Little Treats Bundle featured on October 11th Facebook Live

 So sorry it has taken so long for me to post the instructions from October 11th's Facebook Live.  My computer is having issues and needs to go visit the Geek Squad!  So withouth further ado, here are the instructions!

Happy Birthday Hinge Step Card



Supplies:
 
Stamps: Little Treats
Inks: Calypso Coral, Crushed Curry, Coastal Cabana, Misty Moonlight
Cardstock:  Calypso Coral – one piece cut to 8 ½” x 5 ½” and scored at 4 ¼” for card base
Whisper White – three pieces, one cut to 2” x 5” and one cut to 4” x 5 ¼” and a scrap big enough to accommodate the larger label die from the Little Treat Box dies.
Coastal Cabana – one piece cut to 2 1/8” x 5 1/8”
Designer Series Paper (DSP): Playing with Patterns – three pieces; one 6” x 6” for the die cut, one piece cut to 4: x 5 ¼” and one cut to ¾” x 4” (see photo for patterns used)
Accessories:  Little Treat Box dies, Polka Dot Tulle Ribbon, Playing with Patterns Resin Dots, Stamparatus, Stampin’ Dimensionals
 
Directions:
 

Use the Little Treat Box dies to cut a treat box from the 6” x 6” DSP.  Cut the two pieces containing the scalloped edges away for the box (save the scraps for another project).  Place one of the scalloped edge pieces in the trimmer with the top of the scalloped edge at the 1” mark and score. Repeat with the other scalloped edge piece. Set these pieces aside.   Cut a 13” length of the Polka Dot Tulle Ribbon and dye it Calypso Coral by holding it to the Calypso Coral pad with a paper town and then dragging the ribbon through the ink.  You may have to do this several times to get the desired depth of color.  Place the ribbon aside to dry and carefully clean your hads so as not to get the ink all over your project.  Place the 2” x 5” piece of Whisper White cardstock into the Stamparatus with the 2” length along the top and lining up the 5” length on the left side of the Stamparatus..  Secure the piece in place with a magnet.  Place the uninked Banner image from the Little Treats set on the top portion of the cardstock leaving about ¼” from the top of the piece.  Close the Stamparatus plate and pick up the stamp.  Ink the stamp with Calypso Coral image and close the plate so the image stamps onto the cardstock.  After stamping, clean the image and lift the plate from the Stamparatus base and move it down one “notch”. Ink the stamp with Crushed Curry and stamp again.  This image should now be about ¾” of an inch below your first stamped image.  After stamping, clean the stamp, lift the plate from the Stamparatus and this time move it down two more notches (this will leave room for the sentiment).  Ink the stamp with Coastal Cabana and stamp.  After stamping, clean the stamp, lift the plate from the Stamparatus and move down one notch.  Ink the stamp with Misty Moonlight and stamp.   Remove your stamped piece from the Stamparatus and set the Stamparatus aside.  Ink the “Birthday Wishes” stamp with Calypso Coral ink and stamp it onto the Whisper White scrap.  Cut the sentiment out using the large label die from the Little Treat Box dies, lining the sentiment up with the top of the die instead of centering (this will leave room for the resin dots.  Adhere the die cut sentiment to the center of the stamped panel using Stampin’ Dimensionals.  Adhere the stamped panel to the 2 1/8” x 5 1/8” piece of Coastal Cabana cardstock.  Place one of the scalloped edge pieces previously cut from the Little Treat Box die so that the 1” score line lines up with the right edge of the cardstock and centering it with the sentiment (see photo for help on placement)  Secure this piece to the cardstock and trim on the left hand side if needed.  Adhere the 4” x 5 ¼” piece of Playing with patterns onto the card front.  Adhere the stamped panel to the left side of the card front leaving about a 1/8” border.  Fold the remaining scalloped edge piece along the 1” score line.  Place adhesive on the portion of the piece below the score line.  Line the piece up with the scalloped edge on the card front and then close the card, securing the piece to the back of the inside of the card.  (See photo for placement).  Adhere the ¾” x 4” piece of DSP to the 4” x 5 ¼” piece of Whisper White cardstock.  Adhere this piece to the inside of the card (it will cover the part of the die cut that is not scalloped.  Close the card, thread the ribbon through the holes in both of the scalloped pieces and tie the card shut.  For the finishing touch, place three of the Coastal Cabana colored Playing with Patterns Resin dots below the sentiment.

 

If desired cut another treat box and decorate as shown as a matching gift to the card.

 

 

Primitive Tree Card and Matching Treat Box




Supplies:
Cardstock: Pretty Peacock – Three pieces; one cut to 8 ½” x 5 ½” and scored at 4 ¼”, one cut to 3” x 5 ¼” and one scrap large enough to cut one of the scalloped edge pieces from the Little Treat Box dies.
Very Vanilla – one piece cut to 4” x 5 ¼”
Shaded Spruce – one piece cut to 3 ¼” x 5 ¼” ( this piece could be crumb cake if desired)
Early Espresso – one piece cut to ¾” x 3 ¾” and scored at 3/8” on the long side.
Designer Series Paper (DSP): Plaid Tidings - three pieces all from the same pattern; one piece left at 6” x 6”, one piece cut to 4” x 5 ¼” and one piece cut to ¾” x 4”
Accessories: Pine Tree punch, Braided Linen Trim
 
Directions:

 

Use the Little Treat Box dies to cut a box from the 6” x 6” piece of DSP (save the scraps!) and to cut one of the scalloped edge sections from the scrap of Pretty Peacock cardstock.  Assemble the Treat Box.  Use the Pine Tree Punch to punch a tree in the center of the Pretty Peacock piece that was cut from the die.  Trim the scalloped edge from the Pretty Peacock piece and adhere it to the front of the Treat Box (the pattern will show through the punched image.  Tie the treat box closed using the Braided Linen Trim.   From the scraps of leftover DSP cut out the two large and two small rectangles.  Adhere these triangles to the ¾” x 3 ¾” piece of Early Espresso using the score line to center the pieces.  The two larger triangles will be the bottom of the tree and the two smaller triangles will be the top of the tree.  Adhere the assembled tree to the 3” x 5 ¼” piece of Pretty Peacock cardstock.  Adhere this panel to the 3 ¼” x 5 ¼” piece of Shaded Spruce cardstock.  Adhere the 4” x 5 ¼” piece of DSP to the card front and then center the panel onto the card front.  Adhere the ¾” x 4” piece of DSP to the 4” x 5 ¼”  piece of Very Vanilla cardstock and adhere to the inside of the card.

Here are two other treat boxes I made during the Facebook Live (they really don't need any directions)


I hope to see you tomorrow!!!!


Tuesday, October 6, 2020

Flights of Fancy featured on Facebook Live Sunday, October 4th

 The images in the Flights of Fancy set are just adorable.  I did two fancy fold cards with two of the images.  I really enjoy doing fancy folds and I hope you do too!

Little Witch Card

 


Supplies:
 
Stamps: Flight of Fancy
Inks: Memento Tuxedo Black, Crushed Curry, Blackberry Bliss, Cajun Craze
Stampin’ Blends: Light Blackberry Bliss, Dark Mango Melody, Light Granny Apple Green, Light Smoky Slate, Light and Dark Crumb Cake
Cardstock:  Blackberry Bliss – one piece cut to 11’ x 4 1’4” and scored at 4 ¼” and 8 ½”
Whisper White – two pieces; one cut to 4” x 4” and one cut to 2 ¼” x 4”
Crushed Curry – one scrap large enough to accommodate a 2” punch
Designer Series Paper (DSP): Plaid Tidings – one piece of the white plaid cut to  2 ¼” x 4”
Accessories:  2” Circle Punch, Autumn Punch Pack, Brayer, Stampin’ Sponges, Stampin’ Dauber, Rhinestone, Wink of Stella, Rhinestones
 
Directions:
 

Place the 11” x 4 ¼ piece of cardstock where the 4 ¼” side is at the top and the 8 ½” score line is at the top as well.   Slide the 2” circle punch onto the cardstock about ¼” from the left-hand side and center the score line at the 8 ½” mark in the punch and punch a circle. Fold the up the bottom of the card to the 8 ½” score line.  With the top portion of the card open, adhere punched circle to the back of the 4 ¼” x 4 ¼” portion of the card.  Punch a 2” circle from the Crushed Curry Cardstock.  Use Stampin’ Sponges to sponge Crushed Curry and Cajun Craze ink around the outer edge of the circle.  Use the dauber to lightly add some Cajun Craze on the right side of the circle.  Ink the small “sparkle” stamp with Crushed Curry and stamp on the right side of the circle to mimic craters on the moon.  Adhere this piece to the front side of the 4 ¼” x 4 ¼” portion of the card base matching it to the Blackberry Bliss Circle ( the top of the 4 ¼” x 4 ¼” layer will be sandwiched between the two circles).  Fold the top of the card down over the 4 ¼” x 4 ¼” square potion.  Temporarily adhere the 2 ¼” x 4” piece of Whisper White to the front of the top layer (this is have half of the punch on the left side).  Open the card and use the 2” punch to punch through the Whisper White layer.  Remove the now punched Whisper White layer from the card front.  Place a piece of regular tape over the moon on the Witch stamp. Ink the stamp with Memento Ink and then remove the tape, this will “omit” the half moon on the Witch image.  Stamp the image onto the Whisper White being careful not to let any portion of the stamp fall into the punched area.  Color the image using the following Blends:  Dark Mango Melody for the Stars and Moons on her dress and the sparkles on her wand and the vapor trail of her broom, Light Blackberry Bliss for her hat and dress, Light Granny Apple Green for her face and hands, Light Smoky Slate for the mouse, Light Crumb Cake for the straw of the broom and Dark Crumb Cake for the handle of the broom.  Place a rhinestone in the center of each “sparkle” and use Wink of Stella to accent the stars and moons on her hat and dress and the vapor trail of her broom. Adhere this layer to the top front of the card.  Use the brayer to apply Blackberry Bliss ink to the 2 ¼” x 4” piece of black and white Designer Series Paper.  Adhere this piece to the bottom front of the 4 ¼” x 4 ¼” section of the card base. 

  

Little Angel Card

 


Stamps: Flights of Fancy
Inks: Memento Tuxedo Black
Stampin’ Blends: Light Old Olive, Light Poppy Parade, Light Misty Moonlight, Dark So Saffron, Ivory
Cardstock: Misty Moonlight– two pieces; one cut to 8 ¼” x 5 ½”” and scored at 5 ½’  for card base and one cut to 2 ½” x 8”
Whisper White – two pieces cut to 2 ¼” x 3 ¾”
Designer Series Paper (DSP): Trimming the Town: one piece cut to 4” x 5 ¼” and one cut to 2 ½”x 4”.  Sentiments cut from the piece of Designer Series Paper that has all the sentiments and houses cut from the Designer Series Paper that has the small houses. SEE PHOTO FOR PATTERNS USED
Accessories: Adhesive Backed Snowflakes, Pearls, Wink of Stella and  Stampin’ Dimensionals.
 
Directions:
 

Use Memento ink to stamp the Angel stamp onto one of the 2 ¼” x 4” pieces of Whisper White Cardstock.  Use Stampin’ Blends to color the Angel as follows: Dark So Saffron for her hair, Ivory for her face, hands and feet, Misty Moonlight for the top of her dress and for the section of the dress that has the circles, Light Old Olive and Poppy Parade for the triangle sections.  Place Adhesive Backed Snowflakes over the snowflakes in the image.  Cut five small house (see photo for the ones I used) and adhere over the stamped houses popping one on each side up with Stampin’ Dimensionals.  Fold the 2 ½” x 8” piece of Misty Moonlight cardstock at the 4” score line.  Adhere the stamped image to the front of this piece being sure the fold is on the right-hand side.  Open the piece and adhere the other 2 ¼” x 3 ¾” piece of cardstock, again being sure the fold is on the right-hand side. Adhere the 4” x 5 ¼” piece of Designer Series Paper to the card base being sure the score line is on the left side.  Close the card along the score line and adhere the 2 ½” x 4” piece of Designer Series Paper.  Open the card and adhere the folded piece of cardstock containing the stamped image to the center of the section with the 4” x 5 ¼” piece of Designer Series Paper.  Be sure the fold is on the right-hand side.  See the photo for placement and how the card looks when closed. Adhere the selected sentiment to the bottom right hand portion of the card.

I hope you have a wonderful week and look forward to seeing you next week!  Remember:  Send out the cards you make, I'm sure they will brighten someone's day!