Harvest Hellos and Celebration Tidings

 Hi all!  Hope you are having a great week.  These are the directions for the projects seen on my Facebook Live from August 16, 2020

Apple Teacher Treat

 

Stamps:  Harvest Hellos

Inks: Memento Tuxedo Black, Versamark

Cardstock: Real Red scrap for apple images, Basic Black 4 ¼” x 2” and a scrap for stamping the sentiment.  Garden Green and Crumb Cake scraps

Stampin’ Blends:  Dark Soft Suede

Accessories:  White ink pen (non-SU), Apple Builder Punch, Glue dots, White Embossing Powder, Heat tool, Black Stampin’ Dimensionals.  Black Glittered organdy ribbon

 

Directions:

Stamp two of the apple outlines using Memento Tuxedo Black onto Real Red cardstock.  Use White ink pen to accent the lines on the apple image (see photo for placement).  Punch the apples out using the Apple Builder Punch. Stamp two apple stems using Memento Tuxedo Black onto Crumb Cake cardstock and color with the Dark Soft Suede Stampin’ Blends.  Stamp two leaf images onto Garden Green cardstock using Memento Tuxedo Black.  Punch all out using the Apple Builder punch.  Attach a stem and a leaf to each apple using glue dots.  Score the 4 ¼” x 2” piece of Basic Black along the long sides at 1 3/8” and along the short sides at 1 ½” from each end.  Place Tear and Tape along each long side as close as possible to the score line.  Cut on each side at the 1 ½” score lines only cutting only to where the 1 3/8” score line is.  Fold up and and attach the punched apples to the folded sides.  Stamp the sentiment onto a scrap of Basic Black using Versamark ink.  Apply white embossing powder to the image and set with the heat tool.  Cut closely around the image and attach to one of the apple images using a black Stampin’ Dimensional.  Fill treat with candy wrapped in clear wrap and secured with Black glittered organdy ribbon.

 

 

Pumpkin Card

 

 

Stamps: Harvest Hellos, A Wish for Everything

Inks: Memento Tuxedo Black, Stazon Black

Cardstock: Pretty Peacock – Two pieces- one piece cut to 8 ½” x 7” and scored at 3 ½”, one piece cut to 2 ¼” x 7 ½” and one piece cut to 4 ¼” x 1 ½”

Plaid Tidings Designer Series Paper – two pieces cut 6” x 3”

Cajun Craze – two pieces – one cut to 2 ½” x 7” and one cut to 4 ¼” x 1 ½”

Very Vanilla – One piece cut to 2 ½” x 7”

Copper Foil – Three pieces - one cut to 8” x 3”, one cut to 2 ½” x 4” and one cut 4 ¼” x 1 ½”

Accessories:  Apple Builder Punch, Word Wishes dies, Hammered Metal 3D embossing folder, Adhesive Sheets, Stampin’ Dimensionals.

 

Directions:

Stamp three pumpkin images on the 2 ½” x 7 ½” piece of Pretty Peacock cardstock and  one pumpkin image on each of the pieces of Plaid Tidings Designer Series paper using Memento Tuxedo Black Ink.  Use the Apple Punch to punch stems from one of the pieces of the Plaid Tidings Designer Series Paper. Clean the stamp and then stamp the pumpkin image one more time onto the 2 ½” x 4” piece of Copper Foil cardstock using Black Stazon Ink.  The ink will be a little slippery on the foil cardstock so be sure not to rock or move the stamp once it makes contact with the cardstock.  Use the Apple Builder punch to punch out all of the pumpkins.  Leave the three Pretty Peacock pumpkins whole and cut the other three pumpkins into sections.  Adhere the pumpkin sections in a random pattern to the Pretty Peacock pumpkins.  Emboss all three pumpkins using the Hammered Metal 3D embossing folder.  Use this same folder to emboss the 8” x 3” piece of Copper Foil cardstock (the cardstock will be longer than the embossing folder so run it through once and then turn the cardstock run it through again.  Apply a piece of adhesive sheet to the back of the 4 ¼” x 1 ½” piece of Copper Foil cardstock and then cut the “Thanksgiving” die from the Word Wishes die using the Stampin’ Emboss an Cutting machine. Remove the remaining backing from the adhesive sheet on the “Thanksgiving” die cut and adhere the die cut to the 4 ¼” x 1 ½” piece of Cajun Craze cardstock.  Trim around the die.  Stamp “Happy” from the A Wish for Everything stamp set onto a scrap of the Cajun Craze cardstock.  Hand cut around the word.  Adhere the 8” x 3” piece of embossed Copper Foil cardstock to the card base.  Adhere the 2 ½” x 7” piece of Cajun Craze cardstock to the embossed Copper Foil piece.  Be sure to use a stong adhesive or Tombow adhesive to adhere this piece as the Copper Foil is slick.  Evenly space the three pumpkins onto the Cajun Craze layer, using Stampin’ Dimensionals to adhere them.  Use Mono Adhesive to adhere the pumpkin stems and the “Happy” and “Thanksgiving” die cuts to the pumpkins. Adhere the Very Vanilla piece of cardstock to the inside of the card and decorate as desired.

 

Happy Haunting Treat Bag

 

Stamps: Celebration Tidings

Inks: Memento Tuxedo Black

Cardstock: Pumpkin Pie cut to 4 ¼” x 5 ½”

Scrap of Whisper White for the Spider

Accessories:  Celebration Label Dies, Mosaic Gusseted Cellophane Bags, Glue dots, Black Glitter Ribbon, Mini Stampin’ Dimensionals, Regular stapler

 

Directions:

Cut the second largest die in the Celebration Label dies from the Pumpkin Pie cardstock.  Score along the center (where the notches are) for easy folding.  Stamp the spider web swirl image towards the bottom of one end of the die cut using Memento Ink (use the photo for placement) and then stamp the Happy Haunting sentiment right above it. Fold in half to create a treat topper.  Stamp the spider image onto the scrap of Whisper White and cut out with the matching spider die.  Attach the cut out spider to the treat topper with a Mini Stampin’ Dimensional.  Cut a piect of the Black Glitter Ribbon about 7” long.  Secure one end to the back of the treat topper right below the fold.  Bring the ribbon to the front of the topper and twist it across the top of the treat topper (see photo).  Secure to the back of the treat topper using another glue dot.  I put an extra glue dot under the middle of the ribbon just to keep it twisted.  Put desired treats into a Mosaic Gusseted Cellophane Bag.  Fold the top over and staple at the top.  Use glue dots to adhere the treat topper to the bag.  Happy Haunting!!

 

 

Always Grateful Card

 

Directions:

 

Stamps: Celebration Tidings

Inks: Memento Tuxedo Black, Pumpkin Pie

Stampin’ Blends:  Light and Dark Pumpkin Pie, Light and Dark Old Olive, Dark Mango Melody, Dark Blackberry Bliss and Light Soft Suede

Cardstock: Pumpkin Pie - two pieces; one cut to 4 ¼” x 5 ½” and one cut to  8 ½” x 3”1/2” and scored at 4 ¼”.

Very Vanilla - Two pieces cut to 3 ¼” x 4”

Plaid Tidings Designer Series Paper (DSP) – (see photo for pattern used) four pieces; two cut to 1” x 4”, one cut to  3 ¼” x 1 ½”  and one cut to ½” x 3 ¼”

Accessories:  3/8” Embroidered Ribbon, Stampin’ Sponge and sticky notes to use for masking (at least 3” x 3” square), Glue Dots

 

Adhere the 3 ¼” x 1 ½” piece of Plaid Tidings DSP to one of the 3 ¼” x 4” pieces of Very Vanilla cardstock.  Stamp the Pumpkin image upside down close to the edge of the DSP using Memento ink.  Turn the stamp right side up and stamp toward the top of the same piece of cardstock.  Stamp the sentiment in the space between the two pumpkin images.  Place one of the 3” x 3” sticky notes along the line at the bottom of each pumpkin image and then place one on each side to form a rectangle around the sentiment.  Use the Stampin’ Sponge to apply Pumpkin Pie ink to the rectangle you have formed.  Remover the sticky notes and you should have a Pumpkin Pie shaded area over the sentiment (see photo).  Cut a 5” piece of the Embroidered Ribbon and wrap around the front of the card.  Cut another piece of the Embroidered Ribbon and tied a bow and affix this to the center of the ribbon on the front of the card using glue dots.  Fold the 8 ½ x 3 ½” piece of Pumpkin Pie cardstock along the score line.  Attach the stamped image to the front of this piece.  Adhere the ½” x 3 ¼” piece of DSP along the bottom of the remaining Very Vanilla cardstock and adhere this to the inside of the folded cardstock.  Place the 1” x 4” pieces of DSP on either side of the 4 1’4” x 5 ½” piece of Pumpkin Pie cardstock leaving an even border around the outside edges.  Adhere the folded piece of Pumpkin Pie cardstock containing the image on the front to the middle of the 4 ¼” x 5 ½” piece of cardstock.  Enjoy!

Here's the link to the Facebook Live video if you want visual instructions as well:

https://www.facebook.com/StampinwithRuthieB/videos/679469599593023

Have a great week!